Windows Media Player Reading Wrong Song Duration

Several Windows users are reporting that they are prevented from ripping music with Windows Media Player by the "Windows Media Histrion cannot rip ane or more than tracks from the CD" fault. Most afflicted users report that the issue occurs when they endeavour to rip an Audio CD.

What causes the Windows Media Player cannot rip one or more tracks from the CD error?

We investigated this detail event by looking at various user reports and the methods that they used to resolve the result. Based on what we gathered, in that location are several common scenarios that will typically trigger this particular error message:

Error correction is disabled – Windows Media Player is equipped to set minor errors that cannot exist fixed conventionally. However, this choice is disabled by default, then yous'll need to enable it manually.
Unavailable locations are listed as libraries – This is a well known WMP problems that has been manifesting since Windows Vista. It usually occurs if one of the specified music libraries is actually a broken rip location.
CD is being ripped to a depression quality – You might be seeing the mistake bulletin considering yous're trying to rip the CD to a depression quality. If that's the case, you most likely circumvent the consequence by ensuring that yous're ripping to an improved sound quality.

If you're struggling to resolve this particular effect, this article will provide you with a collection of verified troubleshooting steps. Below you have a list of methods that other users in a like situation take deployed to either resolve or circumvent the issue.

For the all-time results, follow the methods below in the order that they are advertised until y'all stumble upon a ready that resolves the trouble in your particular situation.

Method 1: Enable Mistake correction

Some affected users take managed to resolve the issue by accessing the settings menu of Windows Media Player and enabling fault correction. This can be done by accessing the Tools bill of fare and checking error correction for both ripping and playback.

Fault correction enables Windows Media Role player to play or rip CDs that contain errors. This can be useful if you're encountering the issue due to a CD writing error.

Here'due south a quick guide on how to enable mistake correction in Windows Media Thespian:

Press Windows cardinal + R to open upwardly a Run dialog box. Then, type "wmplayer" and press Enter to open Windows Media Player (WMP).

Run dialog: wmplayer
Within Windows Media player, correct-click on a costless infinite where the ribbon should be and select Tools > Options.

In WMP, right-click on a costless space and go to Tools > Options
In the Options screen, get to the Devices tab and select your CD/DVD writer (the ane that y'all want to employ to rip your music files. With the writer selected, click the Properties menu.

Get to the Devices tab, select your writer and click Properties
In the Backdrop screen of your DVD writer, enabled Digital for both Playback and Rip, then cheque the box associated with Use mistake connection. Finally, hit Apply to salve the changes.

Set Playback and Rip to Digital, so enable Use error correction
Endeavour to rip the music again and run into if y'all even so receive the same mistake message.

If you're still seeing the "Windows Media Player cannot rip ane or more tracks from the CD" fault, move downwardly to the next method below.

Method 2: Boost the quality of the ripped music

Other users encountering the aforementioned error message have managed to resolve the outcome after using the Sound quality slider to set it to the highest (or 2d highest) quality bachelor. Several affected users reported that one time this setting was agile, they where no longer encountering the "Windows Media Player cannot rip one or more tracks from the CD" fault.

Here's a quick guide on adjusting Rip settings quality in social club to eliminate the error message:

Press Windows primal + R to open up a Run dialog box. Then, type "wmplayer" and printing Enter to open up up Windows Media Player.

Run dialog: wmplayer
Inside Windows Media Histrion, right-click on the ribbon and choose Tools > Options.

In WMP, correct-click on a gratis space (in the ribbon) and become to Tools > Options
In the Options window, go to the Rip Music tab and max the sound quality slider for each Format underRip settings.

Ready the slider for each Format under Rip settings to Best Quality (or 2d all-time)
Hit Apply to relieve the current configuration, then attempt to burn the music again to meet if the process completes without the "Windows Media Player cannot rip one or more tracks from the CD" error.

If yous're all the same encountering the aforementioned issue, move downward to the next method below.

Method iii: Removing unavailable locations

As some users have reported, the issue tin also occur if you're Windows Media Actor is property broken rip music locations. These tin interfere with the ripping process and are known to trigger the "Windows Media Player cannot rip i or more tracks from the CD" error.

Several users in a similar state of affairs take managed to resolve the result after removing any unavailable locations and setting the correct music library equally the default. Hither's a quick guide on how to do this:

Printing Windows fundamental + R to open up a Run dialog box. Then, type "wmplayer" and press Enter to open up Windows Media Thespian.

Run dialog: wmplayer
Inside Windows Media Player, click on Organize > Manage Libraries, then click on Music.

get to Organize > Manage libraries > Music
In the Music Library Locations screen, remove any location that is no longer available past selecting information technology and clicking Remove. Once you removed every unavailable location, brand certain that the files yous're trying to rip are located inside the Default folder.

Removing any unavailable location from Music Library Locations
Restart Windows Media Player and run into if the rip attempt is successful this time.

If y'all're even so encountering the "Windows Media Actor cannot rip ane or more tracks from the CD" error, move down to the next method below.

Method 4: Setting up the Music libraries folder

Several users struggling to resolve the same error have finally managed to get information technology resolved after noticing that they didn't have a location to where the music is existence ripped to. They fixed the issue by making certain that the main library folders (Music, Pictures, Videos and Recorder TV) all had specified locations.

Here's a quick guide on how to exercise this:

Press Windows key + R to open up upwards a Run dialog box. Then, blazon "wmplayer" and press Enter to open up Windows Media Player.

Run dialog: wmplayer
Inside Windows Media Player (WMP), right-click inside the ribbon bar and go to Tools > Options.

In WMP, correct-click on a free space (in the ribbon) and go to Tools > Options
Go to the Rip Music tab and meet if you lot accept any location listed under Rip music to this location. If yous don't have one, move down to the next steps below.

See if yous have a location listed under Rip music to this location

Note: If you lot already have a location listed, spring straight to Method 5.
In WMP, click on the Organize tab, then cull Manage Libraries > Music.

Organize > Manage Libraries > Music
Under library locations, yous should run across a Music folder (typically located in C:\Users\*youruser*Music). If you don't see it, click the Add button and then click on Include folder to add it manually.

Click Add, browse to the location of Music binder and click Include Binder
Echo stride 5 with every library folder left (Video, Pictures, Recorded Idiot box).

Making sure the Library folder is set correctly for every type of media
Return to the Rip Music tab using step v and ostend that the Music library binder is prepare correctly. If information technology is, attempt to rip the music CD once more and run across if you're still getting the same fault message.

If you're even so seeing the "Windows Media Histrion cannot rip one or more tracks from the CD" mistake or this method wasn't applicable, motion down to the next method below.

Method 5: Restoring the Music library folder to Default

If you've come up this far without a result, it's very likely that WMP (Windows Media Player) is dealing with some corrupted files or settings that are inhibiting the ripping feature.

Several users take reported that they managed to resolve the "Windows Media Histrion cannot rip one or more than tracks from the CD" mistake after restoring the Music library to the default and making certain that the save location is properly selected.

Hither's a quick guide on how to exercise this:

Make sure that Windows Media Player is properly closed.
Open File Explorer and expand the Libraries menu. And so, right-click on the Music library and cull Properties.

Right-click on the Music library and click on Properties
In the Music Backdrop window, click on Restore Defaults.

Click on Restore Defaults
Once the default settings take been reverted, restart your calculator and come across if you are able to burn the music without encountering the "windows media player cannot rip one or more tracks from the cd" error.